If you're doing a project where you have to cut wood, you have many choices for the right power tool to use. Table saws can cut large pieces of wood in a straight line. They are bulky tools, however, and not very portable. Miter saws can cut different angles and are more portable than table saws. They can't cut large boards, though. A circular saw is handheld, very versatile, and can cut almost all pieces of wood, but can be difficult to keep straight. Finally, jigsaws are capable of cutting curves and even circles into wood, but it takes a lot of skill to do this properly. Based on these characteristics, choose the best tool for your particular project.
Choose a small or portable table saw if you have limited space. Table saws are versatile tools that can achieve a straight, clean cut. There are many models available, and the one you choose depends on how you plan on using it. First, consider the amount of space you have. If you don’t have a lot of room and will need to store the saw when it’s not in use, consider a portable model with wheels or a lightweight design. Take size into account as well. If you will be cutting large wood boards, you’ll need a larger table. Some tables adjust to accommodate larger pieces of wood.
- If you don’t know where to start, speak with a sales representative at a hardware store for advice.
- Some hardware stores also rent equipment like this. Consider renting if you only need the saw for one job.
- Take all the necessary safety precautions when using a table saw like wearing goggles and gloves, and locating the emergency shutoff switch.
- Adjust the saw blade so the gullet is even with the top edge of the wood. The gullet is the grooved portion on the saw blade where the teeth meet the body. When the gullet is even with the top of the wood piece you’re cutting, the blades will pass cleanly through the whole piece. Hold the piece of wood you’re cutting up to the blade. Then turn the adjustment lever so the blade reaches the correct height.
- Consult your owner’s manual for the precise mechanism your saw uses for blade adjustment.
- Set the fence so the blade is over the line you will cut. The fence is the part of the table that keeps the wood straight while you cut. Adjust it so it touches the wood and locks it in place along the line you will cut.
- For example, if you’re cutting a 2 in (5.1 cm) block of wood in half lengthwise, measure 1 in (2.5 cm) from the blade to the fence, and adjust the fence onto this point
- ARTICLES SOURCES : https://www.wikihow.com/Cut-Wood-Using-Various-Power-Tools